MEGGITT Vibro meter Signal conditioner IPC 704

MEGGITT Vibro meter Signal conditioner IPC 704

DESCRIPTION

The IPC 704 signal conditioner converts the chargebased signal from a piezoelectric-based transducer into a current or a voltage signal. This current or voltage signal is transmitted to the processing electronics via a standard 2-wire or 3-wire transmission cable. The current modulation technique allows transmission over a distance of up to 1 km. A GSI galvanic separation unit is required for this configuration. The electronic circuitry of the IPC 704 signal conditioner is incorporated into a moulded aluminium enclosure. The signal conditioner has configurable

igh-pass and low-pass filters and an optional integrator to give a velocity output. Furthermore, RFI filters protect the input and output against radiofrequency interference and other electromagnetic influences. A range of installation options are available for the IPC 704 signal conditioner, including: » A polyester enclosure providing environmental protection against dust, oil and water jets. » A mounting adaptor allowing the IPC 704 signal conditioner to be mounted on a DIN rail.

Signal conditioner 
Vibro-Meter 
Conditioner 
IPC 704 
IPC 704 signal conditioner for sensors using standard 
piezoelectric materials 
Ordering number: 244-704-000-511 
A2-B07-C90-02.5-15-F10000-GO-HO-10 
DMF 042015 
Explosive Ex i 
Sensor sensitivity 
PC/bar µA/mbar 07 
Value per mechanical unit 
High-pass filter: 5 hz 
Low-pass filter: 10000 hz 
Signal conditioner onl 

شرکت صدرا انرژی توربین کمپرسور تامین کننده 

Meggitt Vibro Meter

Contact us

Unit 402, 4th floor, No. 42, Sharifi St., Jordan St., Tehran, Iran

Tel: 0098-2188779847-Fax  0098-2188779514

www.setc.ir-info@setc.ir

Mob:00989123840728